Share:
An acetylene flashback arrestor is a safety device that is used to prevent the reverse flow of gas back into the equipment or supply line. This can happen if the flame from the torch is extinguished, and the gas then ignites inside the torch or regulator. A flashback arrestor will stop the flame from traveling back up the line, and prevent an explosion.
Flashback arrestors are most commonly used in oxy-fuel welding and cutting, which uses acetylene gas. Acetylene is a very unstable gas, and it is susceptible to flashback. For this reason, it is essential to use a flashback arrestor whenever you are working with acetylene.
Flashback arrestors are typically made of a ceramic or metal mesh that is designed to allow the gas to flow through, but to prevent the flame from traveling back up the line. They are typically installed between the torch and the regulator, and they are a critical safety device for any oxy-fuel welding or cutting operation.
Here are some of the benefits of using an acetylene flashback arrestor:
- They prevent explosions.
- They protect the user from injury.
- They protect the equipment from damage.
- They help to extend the life of the equipment.
If you are working with acetylene, it is essential to use a flashback arrestor. They are a simple and inexpensive safety device that can help to prevent serious accidents.
Here are some safety tips for using an acetylene flashback arrestor:
- Always check the arrestor for damage before use.
- Replace the arrestor if it is damaged.
- Do not use an arrestor that is more than 10 years old.
- Make sure that the arrestor is properly installed.
- Do not use the arrestor if it is clogged.
Flashback arrestor knowhow
How does flashback arrestor works
Inquiry - Flashback Arrestor Acetylene (DA)
